Arkbird
- 3 -
3.
Independent GPS module connection:
If no serial GPS or Arkbird TX port is available, one independent GPS can be added.
Connect the "5V, GND, serial ports signal" into airborne module which has a 5V power supply (100 mA)
for GPS module.
4.
Power on after wiring check. Observe STATUS LED on the upper right corner
LED Power should be consistently on., Status LED on the upper right will double flash (twice per
second) if the
video signal
is the only one identified; and LED flashes fast (10hz) if the video signal and
GPS signal
are both correctly identified.
Please check the video input and GPS wiring to ensure LED
lights
flash fast
.
II.
Ground Demodulation Module Connection:
1.
Connect VEDIO RX port to the video receiver (5.5mm Power12V, RCA video, RCA audio) and be careful
not to affect the rotation.
Install it on a smooth surface or on a tripod using the hole at the bottom.
Avoid magnetic or metal objects
(such as screwdrivers, nails, etc.) to prevent interference to the compass.