MAINTENANCE
19
0
0
1
.0
8
8
7
5
r
e
v
.
1
0
6. Unplug the blue and white wires plug.
7. Unscrew the two small limit switch bolts and
remove the limit switch’s board.
8. The next step would be to remove the drum.
First, rewind the entire strap on the drum
and fix it with tape. Temporarily screw the
Quick Release
knob. Activate the
Quick
Release
with one hand and with the other
slow the drum to permit to remove the 4
turns of pre-load until you place in front of
you the spring screw.
9. Unscrew the spring screw just enough to
loosen the sprint. With a pair of pliers, grab
the spring and locate it on the frame wall like
showed.
10. Remove the clip on the center shaft of drum
and pull out the shaft through the frame.
11. Pull out the drum from the frame. Be careful
not to loose any parts.
12. Once the drum is removed, the next step is
to pull out the electric motor. First, unplug
the two wires attached to the motor.
SPRING