9 AH-MIN V3
08
/
10
/17
WARNING
Some functions may cause injury to the patient if unintentional movement occurs.
WARNING
If the Handset is dropped to the floor, caught between bed parts or sustains any damage or
suspected damage in any way, immediately stop using the Handset and perform the full
Handset Checks as detailed in Section 7 - Maintenance.
100520AUS 100500AUS
Power Operation
When a handset push button is pressed, the appropriate bed function will operate until
the button is released.
Leg Elevation -
Model 100500AUS
Using the control handset, the legs are elevated by increasing the angle of the thigh section. When
the legs are raised, the Kneebreak angle can be manually adjusted by raising or lowering the foot
end, which is supported by a self-locking ratchet strut.
To adjust, hold the mattress retention rail and lift the foot end slightly to disengage the latch then
raise or lower it, reversing the movement a little to re-engage the latch at the required position.
Model 100520AUS
The legs can be manually elevated by raising the foot end of the mattress deck. To adjust, hold the
mattress retention rail and lift the foot end slightly to disengage the latch then raise or lower it,
reversing the movement a little to re-engage the latch at the required position.
