29
PATIENT PLACEMENT
7KLVFKDSWHUJLYHVGHWDLOVRISURFHGXUHVIRUPRYLQJWKHSDWLHQWVDIHO\WRDQGIURPWKH
TheraKair Visio
MRS
Before placing a patient on the
TheraKair Visio
MRS, it is recommended that
personnel familiarize themselves with the information outlined in the
Safety
Information
section and
Operation
chapter of this manual as well as the procedures
outlined below.
Preparing for Patient Placement
1. Ensure that the system is set up as described in the
Preparation for Use
chapter of this
manual.
2.
(QVXUHWKDWDFRYHUVKHHWLV¿WWHGDQGVHFXUHGEHIRUHWUDQVIHUULQJDSDWLHQW
3. Ensure that the system has been properly cleaned and disinfected, as detailed in the
Care
and Cleaning
section of this manual before a new patient is moved to the
TheraKair Visio
MRS.
4. A clean set of air cushions and a clean cover sheet should be used for each new patient.
Patient Transfer to
TheraKair Visio
MRS
1. Press the InstaFlate button on the Home screen to access the InstaFlate screen.
2. Press the ON button on the InstaFlate screen to activate the InstaFlate function.
3.
Raise / lower the height of the bed to the same level as the surface from which the patient
is being transferred.
4. Lower the side rails.
5. Transfer the patient to the
TheraKair Visio
MRS.
6. Center the patient on the mattress from side to side.
7. Raise the side rails on both sides of the bed and lock in place.
8. Press the OFF button on the InstaFlate screen to deactivate the InstaFlate function.
9. Exit the InstaFlate screen to return to the Home screen.
10. Adjust the bed height to its lowest level and adjust the head of the bed as needed for
patient comfort.
11.
0DNHSDWLHQWVSHFL¿FDGMXVWPHQWVDVUHTXLUHG
i
