Troubleshooting
6
001-24257-EN rev
. 4
Technical Specifications
Technical Data
PRODUCT INFORMATION Wall Mounted Battery Charger
Charger model NDA8200
Total weight of charger 2 kg
Compatible with battery type and part number Arjo 24V lead-acid batteries part numbers: NDA0100-03,
NDA0100-20 and NDA0200-20
Input voltage and frequency 100-240 VAC, 50-60 Hz
Power consumption 50 W (full load), ≤ 0.75 W (standby)
Output voltage and charger current 24-29 VDC, 1 A max., 24 VA
Degree of protection IP40
Insulation class Class II
Operating temperature / humidity range 0 °C to 40 °C (32 °F to 104 °F), 90 % RH max
Storage temperature / humidity range -40 °C to 70 °C (-40 °F to 158 °F), 10 % RH to 95 % RH
This Arjo product meets the requirements of the Low Voltage Directive 2014/35/EU, the regulations of the EMC
Directive 2014/30/EU, ECO Design Directive 2009/123/EC and ROHS Directive 2011/65/EU.
The Wall Mounted Battery Charger is compliant to IEC 60601-1 series including applicable collateral standards
and national deviations. The Wall Mounted Battery Charger is also compliant to EN 60335-1:2012+A11:2014 and
EN 55014-1:2006+A1:2009.
WARNING
: Portable RF communications equipment (including peripherals such as antenna cables and
external antennas) should be used no closer than 30 cm to any part of the Wall Mounted Battery
Charger, including cables specified by the manufacturer. Otherwise, performance degradation of this
equipment could result. See "Electromagnetic Compatibility" section for more details.
WARNING
: This equipment is not suitable for use in the presence of
flammable anesthetic mixture with air or oxygen, or with nitrous oxide.
Safe Disposal at End of Life
Package Cardboard, recyclable
Electrical and electronic componants
Charger systems having electrical and electronic
components or an electrical cord should be disassembled
and recycled per Waste of Electrical and Electronic
Equipment (WEEE) or in accordance with local or national
regulation.
Troubleshooting
The charger’s LED does not light up:
• Check if the power cord is plugged into the wall
outlet and into the charger.
• Check if there is power in the wall outlet.
If the LED still not lit, contact your Arjo agent to
replace the charger.
