Maxi Sky600 Programming
34
Fig. 29
Adjusting the Spreader Bar Height
X
Turn the ceiling lift off by pulling on the red cord. The green LED will turn off.
Y
Press the PROG button on the handset. At the same time, turn on the ceiling lift by pushing up on the plastic
insert at the top of the red cord (for units with infrared handsets, pull the red emergency cord again). The
green light will flash, and you will hear three beeps.
Z
The red LED will then illuminate. You can now release the PROG button.
[
Press twice the UP button (you will hear two beeps)to change the spreader bar height.
\
Now press the PROG button to confirm the selection.
]
The strap will begin winding up. Once it is completely wound, press the UP and DOWN buttons to set the
height the spreader bar’s rises to once it is sent to the charging station.
^
Now press the PROG button to confirm the selected height.
_
Press UP to continue within the programming mode, or to return to regular mode, pull on the red cord to turn
the unit off, then push up on the plastic insert to turn it o (for units with infrared handsets, pull the red
emergency cord again).
To select
another feature
Exit programming
mode
Entering the Programming Mode
Spreader Bar Height
Adjustment
Final Steps
