33
Fig. 28
Changing the Speed of Movement
X
Turn the ceiling lift off by pulling on the red cord. The green LED will turn off.
Y
Press the PROG button on the handset. At the same time, push up on the plastic insert switch (for units with
infrared handsets, pull the red emergency cord again). The green light will flash, and you will hear three
beeps.
Z
The red LED will then illuminate. You can now release the PROG button.
[
Press once the UP button (you will hear one beep) for speed adjustment feature.
\
Now press the PROG button to confirm the selection.
]
Using the LEFT button, select one of four predetermined speeds.
^
Now press the PROG button to confirm the selected speed.
_
Press UP to continue within the programming mode, or to return to regular mode, pull on the red cord, then
push up on the plastic insert switch (for units with infrared handsets, pull the red emergency cord again).
Moving
speed of
10 cm/s
Moving
speed of
20 cm/s
(factory
default)
To select
another feature
Exit programming
mode
Moving
speed of
15 cm/s
Moving
speed of
25 cm/s
Entering the Programming Mode
Speed Adjustment
Final Steps
Maxi Sky600 Programming
