43
CLEANING AND DISINFECTION
Figure 73
18.
Scrub the surfaces of Classic Line 2 bathtub, and
the footrest with a soft bristle brush or cloth (to
UHPRYHDQ\GHSRVLWVHJVNLQÀDNHV6FUXE
thoroughly, especially on the grab handles.
See Figure 73.
19. Wipe all other contact areas outside of the
Classic Line 2 bathtub (particularly behind the
head), shower handle and Water temperature
setting knob with the cloth.
20. For bathtubs with Air Spa system:
Disinfection cycle will turn off automatically.
For bathtubs without Air Spa system:
Press the Disinfection ON/OFF button on the
control panel to end the cleaning process.
21. Put the Disinfection spray handle back.
22. Open the Drainage plug.
23. Rinse all internal parts clean with plenty of water
having a temperature of approximately 25 °C
(77 °F) to rinse off disinfectant.
24. Wet a clean cloth with water and remove all
WUDFHVRIGLVLQIHFWDQWÀXLGRQFRQWDFWDUHDV
outside Classic Line 2 bathtub, such as handle
and knobs. Rinse the cloth intermittently in
running water when removing disinfectant.
CAUTION
Never use an abrasive pad or steel wool
on the bathtub as it may scratch the
surface.
Continue with the steps on the next page