33
BATHE PATIENT USING A BATH LIFT TROLLEY
End the bath
(5 Steps)
1. Dry the patient, as well as the underside of the
bath lift trolley, to prevent water from dripping onto
WKHÀRRU
2. Put one or two towels on the patient to keep him
or her warm.
3. Raise the bath lift trolley. See Figure 48.
4. Manually pull the bath lift trolley out across the
side of Classic Line 2 bathtub. See Figure 49.
5. When transferring the patient straight from
Classic Line 2 bathtub to bed, put towel on the
bed under the bath lift trolley to avoid making the
bed wet. Dry the patient thoroughly when lying
down in bed.
Disinfect after each patient
Prepare Classic Line 2 bathtub for the next patient.
Classic Line 2 bathtub and the bath lift trolley must
be fully disinfected after each use to prevent cross
contamination. See Figure 50. See section Cleaning
and disinfection on page 34.
For cleaning and disinfection of the bath lift trolley,
see the respective IFU.
Figure 48
Figure 49
Figure 50
