tom screw. Tighten the stud head screws down
with a screwdriver (not a drill). This pull will be
on the inside of the door. Place the remaining
pull, with the large holes and set screw, onto
the stud heads of the screws. Tighten the set
screws with Allen wrench provided
(O)
.
11)
Adjust ZD-2008 Drip Trough (#12) on door
to slope towards the hinge
(P)
.
12)
Run a bead of silicone on the gap between
the metal and the shower surface inside and
out around the entire unit. Fill all joints and
gaps where metal meets metal and fill with a
fine bead
(Q)
.
Summary of Contents for CDFMP-135
Page 1: ......
