Power CJ
Press the Power Button to instantly turn the unit on and off. Hold for 2 seconds to start the unit if the Delay Start
setting is activated. The unit will beep once when turned On or Off when audio is activated.
SettingsO
Press the Settings Button to access the menu and press the Up or Down buttons to navigate. When the desired
Custom Session Setting is displayed, press the Settings button to select it, then press the Up or Down buttons
to scroll through the options. When the desired option is displayed, press the Settings button to return to the
menu, or wait 5 seconds to return to the temperature display.
LED Lights
LED lights in the unit base and heater can be set to Off, Dynamic Mode, Spectrum Mode, or one of 8 individual
color options. Spectrum Mode changes the color every 2 seconds in a continuous loop. Dynamic mode allows
you to tell the state of the unit at a glance:
• Heating: Pulses from Yellow to Orange during heat up
• Reach Set Temperature: Blinks Green twice when set temperature is reached
• Stable Temperature: Pulses orange continuously while set temperature is maintained
• Fan Operation: Pulses purple when fan is active
• Cooling: Pulses cyan while the temperature is cooling down
• Cooling with Fan: Pulses blue while cooling with the fan activated.
Screen Brightness
The color display has two brightness options, High and Low.
Audio/Beep
This setting has three volume options, Low. High and Off.
Temp.
Alert
When this setting is activated, two beeps will be heard when the set temperature is reached. This option can
also be turned Off.
Auto-Off Timer
A programmable shut-off timer can be set at 30 minute intervals, up to 2 hours, and can be deactivated for
longer use.
Temp. Settings
The default display setting is Celsius, which can easily be changed to Fahrenheit.
14
www.canatura.com/en
