background image

Whip System 

1. Set the Unit to a higher temperature to suit your preference for light or thick 

vapor 170C-220C (338F-428F).

2. Coarsely grind the desired amount of material and load it into the top of the 

Connoisseur Bowl.

Do not load or pack the bowl too tightly or airflow could be restricted. 

3. Attach the Glass Connoisseur Bowl to the unit, then attach the 3' Whip to the

bowl. Wait for approximately 3-5 minutes to prime the materials for use.

4. Inhale through the glass mouthpiece in a slow, steady draw.

5. Alternately, turn on the Fan while inhaling for an assisted draw. 

6. Periodically stirring the bowl contents will help get the most out of your 

material. Use the provided Stirring Tool to stir the material in the chamber. 
Remove the bowl from the unit before stirring.

7. Discard used bowl contents and refill as desired. 

The Dome Screen in the 3' Whip can clog and needs to be cleaned or replaced 

periodically for optimal performance. 

Balloon System 

1. Set the Unit to a higher temperature to suit your preference for light or thick 

vapor 170C-220C (338F-428F).

2. Coarsely grind the desired amount of material and load it into the top of the 

Connoisseur Bowl. 

Do not load/pack the bowl too tightly or airflow could be restricted. 

Always load from the top of the Bowl and never load both bowl chambers atthe 

same 

time. 

3. Attach the loaded Glass Connoisseur Bowl to the unit, then attach the mini­

whip to the bowl. Wait for approximately 3-5 minutes to prime the materials for

use.

4. Attach the balloon mouthpiece to the mini-whip
5. Activate the Fan to your preferred speed and allow the balloon to fill with vapor.

6. Detach the balloon from the mini-whip, then inhale through the Frosted Glass

Balloon Mouthpiece. Seal the balloon between draws using the silicone Balloon 

Cap to prevent leakage. 

18 

Whip System 

Balloon System 

www.canatura.com/en

Summary of Contents for XQ2


















Reviews: