7. Periodically stirring the bowl contents will help get the most out of your
material. Remove the bowl from the unit before stirring, and use the Stirring
Tool to stir the material in the chamber
8. Discard used bowl contents and refill as desired.
G)
If the balloon is filling slowly or not filling, the bag may need to be replaced.
<D
The Dome Screen in the Mini Whip can clog and needs to be cleaned or replaced
periodically for optimal performance.
Balloon Assembly
The Balloon consists of the Bag. Balloon Connector, Balloon Cap and Frosted
Glass Balloon Mouthpiece.
1. Slip the silicone balloon cap over the glass mouthpiece so it rests between the
glass bulbs.
2. Insert the bottom (unfrosted end) of the glass mouthpiece through the
top of the hole of the silicone balloon connector. Push until the bulbs of the
mouthpiece are on each side of the cap.
3. Gather the open end of the balloon and insert it through the large opening in
the threaded base until there is enough material to fold evenly back past the
base threads.
G)
The size of the bag can be adjusted by changing how much material Is pulled
through the opening. Trim excess material
away
with scissors.
4. Push the two pieces of the balloon connector together until they lock. Slide
the connector up the glass until it rests against the bulb closest to the frosted
mouthpiece.
Step1
Step2
0
Step3
Step4
19
www.canatura.com/en
