241434C
Ranger Blood/Fluid Warming
English 13
Method
Unplug the warming unit�
1�
Unfold the cleaning tool� Wet the foam pads with a nonabrasive
2�
solution, such as Alconox* brand detergent�
Insert the tool from the back of the unit and pull the tool all the
3�
way out from the front�
Rinse the tool with water and repeat 3 times�
4�
Wipe off the unit to remove excess fluid�
5�
to
clean
resistant
,
dried
-
on
fluids
:
Spray a nonabrasive solution inside the slot of the warming unit and
1�
let sit for 15-20 minutes�
Clean the unit by using the cleaning tool�
2�
Note:
If the cleaning tool cannot be inserted through the slot of the
warming unit because of excess dried-on fluids, send the unit to a
biomedical technician�
Storage
Store all components in a cool, dry place when not in use�
Servicing
There are no user-serviceable parts in the Ranger warming unit� All service must be performed by
Arizant Healthcare Inc� or an authorized service technician� Call Arizant Healthcare Inc� Technical
Service at 800-733-7775 or 952-947-1200 for service information�
*Alconox is a registered trademark of Alconox, Inc�
