background image

Arizant Healthcare Inc.

13

Technical Specifications

Physical Characteristics 

dimensions of warming unit

 

 

11 in. high x 2.5 in. deep x 7.7 in. wide 
27.9 cm high x 6.4 cm deep x 19.6 cm wide

dimensions of temperature controller

 

 

2.5 in. wide x 5.8 in. long 
6.4 cm wide x 14.7 cm long

weight of warming unit

 

6.3 lb; 2.9 kg. 

mounting options

 

 

Wall mount bracket, IV pole clamp, and rail-
mount bracket with safety strap.

hose

 

 

Detachable, flexible, and washable. 78 in. long x  
1.5 in. wide; 198 cm long x 3.8 cm wide

filtration system

 

Dust filter included.

recommended filter change

 

Change at least every 6 mo.

 

Temperature Characteristics 

temperature control

  

 Electronically controlled using integrated circuit 

sensor. 

heat generated

 

750 BTU/hr (average)

average operating temperatures

 

Variable:  ambient to 40˚ ± 3˚C

at the end of the hose

 

ambient to 104˚ ± 5.4˚F

Safety System Characteristics 

thermostat

 

Independent electronic and heater (electromechanical) 

overcurrent protection

 

Fused input line.

safety feature

 

 Over-temperature: color indicator light illuminates, 

heater and blower shut down. 

certifications

 

 IEC 60601-1: UL 60601-1; CAN/CSA-C22.2, No. 

601.1; EN 60601-1-2; EN 55011; ASTM F2196-02

classifications

 

 Classified under EN 60601-1 Guidelines (and other 

national versions of the Guidelines) as Class II, Type 

BF, Ordinary equipment, Continuous operation. Not 

suitable for use in the presence of flammable anesthetic 

mixtures with air or with oxygen or nitrous oxide. 

Classified by Underwriters Laboratories Inc. with 

respect to electric shock, fire, and mechanical hazards 

only, in accordance with UL 60601-1, ASTM F2196-

02, and Canadian/CSA  C22.2, No. 601.1. Classified 

under the Medical Device Directive (93/42/EEC) as a 

Class IIa device.

Summary of Contents for Bair Paws 850



















Reviews: