14 1791 999
12
Bell Times
Time
Date
Change Codes
Code Privileges
Engineer Code
2.4.4 Digi Cutout
Select for ON if the output type 'Alarm' must reset with the Bell
cutout time. If set to OFF then this output resets when the system
is disarmed.
2.4.5 Perimeter Bell Cutout
Programmed alarm time in minutes for the 'Perim.Alarm' output
type. The exterior bell and Perimeter bell output types will reset
after this time alarm expired. See also Peridiax feature on page
19.
2.5 Time
Programme time in Hours and Minutes:
hh:mm
2.6 Date
Programme date:
dd / mm / yy
2.7 Summertime
2.7.1 Forward date
Date at which clock is advanced with 1 hour (start of summer-
time).
2.7.2 Backward date
Date at which clock is returned with 1 hour (start of wintertime).
2.7.3 Summertime ON/OFF
Select for ON if automatic correction to summertime is required.
3. Users
3.1 Change Codes
Programme here user code 01 to 04. Use from 4 up to 6 digits with
the exception of '0'. Deleting a code is achieved by entering [
ü
]
after appearance of [New code _ ]. Code 4 can be used with a
code counter (see 3.5). Factory default code for user code01is
[1122].
3.2 Code Privileges
Allocate operational functions to each code.
Attribute
Function
. Mn
change codes, time, date, read engineeer memory,
access to chime function
. In
inhibit zones
. Ps
part set of system
. Us
unset of system
. Fs
full set of system
3.3 Engineer Code
Programme here new Engineer code. Factory default is [1278].
CS350 Programming Functions
Summary of Contents for CS350
Page 2: ...14 1791 999 2 ...
Page 31: ...14 1791 999 31 ...
