Aritech ATA-4/9 CSqX, Installation And Operation Manual

Page: 23 / 31

Installation and Operation Manual
Revision B 3-1 0150-0147
3
SERVICE
USER MAINTENANCE
User maintenance of this unit is limited to external cleaning and inspection.
Ensure that the cooling vents are not blocked, and that the unit is installed in a well ventilated location.
In addition, do not place the unit on top of other equipment, which may increase the operating
temperature of the ATA-4/9 CSqX/MSqX.
Refer all servicing to qualified personnel.
WARNING!
Do not open the power supply or attempt to
service it, as this may expose you to
dangerous voltages and other hazards.
FACTORY SERVICE
If the ATA-4/9 CSqX/MSqX requires factory service, contact the dealer who supplied the unit to you
for the correct procedures to return the unit to the factory, or the nearest factory service center.
If the dealer is not available, contact the manufacturer of the unit as detailed below and request a
Return Material Authorisation (RMA) number.
NOTE: The unit’s serial number must be provided before an RMA number can be issued.
Units returned to the factory for service must have freight and insurance prepaid, and must show the
RMA number clearly on all shipping documents. The failure symptoms must be clearly described by
the user, and enclosed with the unit together with a copy of the original supplier’s invoice.
Failure to comply with these instructions will delay service of unit and may result in the unit not being
accepted by the Repair Center.
Factory Address & Repair Center
ARITECH (EUROPE AND AFRICA)
EXCELSIORLANN, 28
B-1930 zAVENTEM
BELGIUM
tel: 32-2-725 11 20
fax: 32-2-721 40 47