User Manual for CD3403
Page 9
Inhibit Zone 2
The system then confirms which zone you have
excluded.
02 Hall
If the message ‘
Inhib. Not Poss
’ is displayed, you
cannot inhibit the zone entered.
If another zone is open, it will be listed and you must
again press and the zone number to inhibit it.
Is Inhibited
The system will then list all the inhibited zones.
If you want to uninhibit a zone, enter the number of the
inhibited zone. The message
‘Unihibiting...’
appears,
followed by the name of the zone. The list of inhibited zones
then reappears. If the message
‘No Inhibits’
appears,
there are no inhibited zones.
7. Press
the
Accept
key to arm the system. The system will
arm automatically even if you do not press the accept
key.
The alarm is being set.
System Arming
The buzzer begins to beep. You must now exit the
protected area by the designated exit route.
Leave now
Beeeep
The alarm is now set.
System Armed
The current date and time will automatically appear.
TUE 23 APR 08.22
D
ISARMING A SYSTEM
If you enter the premises when the system is armed, the buzzer will begin to beep (if programmed) with an
intermittent tone to indicate that the entry period has begun. As long as this beeping continues, you can
disarm (switch off) the system with your code without activating an alarm. You must not enter other areas of
the system during the beeping. If you do, a siren will sound and a full alarm condition may occur. The entry
period (length of time of the beeping) is programmed by the installer.
1.
Go to the keypad. The entry period starts as soon as you
open the entrance door, or when you enter the entry
zone. You can switch off the system without activating
the alarm as long as the beeping continues.
Beep Beep
The current day, date and time are displayed. An
example is shown.
TUE 23 APR 07.39
2.
Press the key
0
and then enter your code. A ‘*’ appears
in the display for every key you press. Use the
0
key to
cancel an incorrect entry and to restart a new entry.
Enter Code
0 + code
Enter Code ****
Disarm?
