Ariston RVS 63, Operating Instructions Manual

Page: 9 / 184

9
GB
Setting and operating mode of zone 1 and
zone 2 managed with Room Thermostat
- Press the heating circuit operating
mode button (2)
- Turn the knob (5) and select the desired
zone
- Press the OK button (6) to confi rm
- Press the heating circuit operating
mode button (2) to select the desired
operating mode
- Press the OK button (6) to confi rm
NOTE: it is necessary to have a heating
request (TA closed).
Setting and operating mode of zone 3
managed with Room Thermostat
(zone 3 enabled on parameter 5890 set to
“Heat circuit pump HCP Q20” value)
- Press the OK button (6) once
- Press the INFO button (3) until the
“menu list” appears
- Turn the knob (5) and select the
“ Installateur ” menu
- Press the OK button (6) to confi rm
- Turn the knob (5) and select “heating
circuit P”
- Press the OK button (6) to confi rm
- Turn the knob (5) and select the
“1300
operating mode” parameter
- Press the OK button (6) to confi rm
- Turn the knob (5) and select the desired
operating mode
- Press the OK button (6) to confi rm
NOTE:
If zone management is performed via
remote control QAA75, the operating mode
must be set on the remote control itself.
1.
2.
3.
4. 5. 6. 7. 8.
TA
(ROOM THERMOSTAT)
TA
(ROOM THERMOSTAT)
ZONE 1
(INTERNAL UNIT 1
QAA75)
ZONE 2
(INTERNAL UNIT 2
QAA75)
ZONE 3
(INTERNAL UNIT P
QAA75)
n n n n n k h f b b b a n p p
M BX4 M BX3 M H3 M B12 M BX2 M BX1 M B1 M H1 M B9 M B3 M MB DB XBD
BSB
LPB
B2 G+CL-CL+CL-CL+CL-CL+