Ariston DK 892 CX AUS, Instructions For Installation And Use Manual, Page: 9 / 28

GB
9
Start-up and use
! The first time you use your appliance, heat the empty
oven with its door closed at its maximum temperature
for at least 2-3 hours. Ensure that the room is well
ventilated before switching the oven off and opening
the oven door. The appliance may emit a slightly
unpleasant odour caused by protective substances
used during the manufacturing process burning away.
!
To make the setting process easier, keep the knob
in position: this will increase the scrolling speed of the
numbers on the display.
! Each setting will automatically be stored in the
appliance memory after 10 seconds.
! The touch controls cannot be activated if the user is
wearing gloves.
Control panel lock
! The control panel can be locked during the cooking
as well as once the cooking has finished.
To lock the oven controls, press and hold the
button for at least 2 seconds. A buzzer will sound and
the TEMPERATURE display shows the key symbol
“O—n”. The
icon will light up to indicate lock
activation.
To deactivate the lock, press and hold the
button
again for at least 2 seconds.
Setting the clock
!
The clock can only be set when the oven is switched
off. If the oven is in standby mode, pressing the
button once will display the current time setting. Press
it again to set the time.
After connection to the power supply network or after
a blackout, the
button on the display will flash for
10 seconds.
To set the clock:
1. Press button
.
2. Turn the TIMER knob towards “+” and “-” to adjust
the hour value.
3. Once you have reached the correct hour value,
press the
button.
4. Repeat the above process to set the minutes.
If a blackout occurs, it will be necessary to reset
the clock. If the
icon flashes on the display, this
indicates that the clock has not been set correctly.
Setting the minute minder
! The minute minder may still be set whether the oven
is switched on or off. It does not switch the oven on or
off.
When the set time has elapsed, the timer emits a
buzzer that will automatically stop after 30 seconds or
when any active button on the control panel is pressed.
To set the minute minder proceed as follows:
1. Press button .
2. Adjust the time as desired by turning the TIMER
knob towards “+” and “-”.
3. Once you have reached the desired value, press the
button again.
The lit symbol will remind you that the minute
minder is on. The DISPLAY will show the countdown.
To cancel the minute minder, press the button and
use the knob to set the time to 00:00. Press button
again.
The icon will switch off to indicate that the minute
minder has been disabled.
Starting the oven
1. Switch the control panel on by pressing the
button. The appliance buzzer sounds three times
(ascending) and all buttons light up in sequence.
2. Select the TOP/GRILL or MAIN oven by pressing the
TOP OVEN/ GRILL or MAIN OVEN icon.
3. Select the desired cooking mode by turning the
SELECTOR knob. The display shows:
- the temperature associated with the mode, if
programming manually;