background image

lp-772 Rev. 000 Rel. 000 Date 3.17.21

2

The following defined terms are used throughout this manual to 

bring attention to the presence of hazards of various risk levels or to 

important product information.

DANGER 

indicates an imminently hazardous situation which, if not 

avoided, will result in serious personal injury or death.

WARNING 

indicates a potentially hazardous situation which, if not 

avoided, could result in personal injury or death.

CAUTION 

indicates a potentially hazardous situation which, if not 

avoided, may result in moderate or minor personal injury.

CAUTION used without the safety alert symbol 

indicates a 

potentially hazardous situation which, if not avoided, may result in 

property damage.

NOTICE 

is used to address practices not related to personal injury.

Foreword

This manual is intended to be used in conjunction with other literature 

provided with the water heater. This includes all related control 

information. It is important that this manual, all other documents 

included in this system, and additional publications be reviewed in 

their entirety before beginning any work.
Installation should be made in accordance with the regulations of 

the Authority Having Jurisdiction, local code authorities, and utility 

companies which pertain to this type of water heating equipment.
Authority Having Jurisdiction (AHJ) – The AHJ may be a federal, state, 

local government, or individual such as a fire chief, fire marshal, chief 

of a fire prevention bureau, labor department or health department, 

building official or electrical inspector, or others having statutory 

authority. In some circumstances, the property owner or his/her agent 

assumes the role, and at government installations, the commanding 

officer or departmental official may be the AHJ.

NOTE: 

Ariston reserves the right to modify product technical 

specifications and components without prior notice.

For the Installer

This water heater must be installed by qualified and licensed personnel. 

The installer should be guided by the instructions furnished with the 

water heater, and by local codes and utility company requirements.

Installations Must Comply With:

Local, state, provincial, and national codes, laws, regulations, and 

ordinances.
The latest version of the 

National Electrical Code, NFPA No. 70

.

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, basic safety precautions to 

reduce the risk of fire, electric shock, or injury to persons should 

be followed, including:
1. READ ALL INSTRUCTIONS BEFORE USING THIS WATER HEATER.
2. This water heater must be grounded. Connect only to a properly 

grounded outlet. See Part 4 – Wiring, this manual, for grounding 

details.
3. Install or locate this water heater only in accordance with the 

provided installation instructions.
4. Use this water heater only for its intended use as described in 

this manual.
5. Do not operate this water heater if it has been damaged or 

dropped.
6. This water heater should be serviced only by qualified service 

personnel. Contact the water heater installer or a qualified service 

agency for examination, repair, or adjustment.

SAVE THESE INSTRUCTIONS

NOTE: 

If the water heater is exposed to the following, do not 

operate. Immediately call a qualified service technician.

 

1. Fire

 

2. Damage

 

3. Water

Failure to follow this information could result in property damage, 

severe personal injury, or death. 

For Your Records

Write the Product Model and Serial Numbers:
Model # ___________________________________________
Serial # ____________________________________________
These numbers are listed on the product ratings label.

Keep this manual and information for future reference.

From the Uniform Plumbing Code 2000 - Section 510 -  

Protection From Damage

1. Water heaters generating a glow, spark or flame capable of 

igniting flammable vapors may be installed in a garage, provided 

the pilots, burners or heating elements and switches are at least 

eighteen (18) inches (457 mm) above the floor level.
2. Where such water heaters installed within a garage are enclosed 

in a separate, approved compartment having access only from 

outside of the garage, such water heaters may be installed at floor 

level provided the required combustion air is also taken from the 

exterior of the garage. Fuel burning water heaters having sealed 

combustion chambers need not be elevated.
3. All water heaters installed in areas where they may be subjected 

to mechanical damage shall be suitably guarded against such 

damage by being installed behind adequate barriers or by being 

elevated or located out of the normal path of a vehicle using any 

such garage.
4. In seismic zones 3 and 4, water heaters shall be anchored or 

strapped to resist horizontal displacement due to earthquake 

motion. Strapping shall be at points within the upper one-third 

(1/3) and lower one-third (1/3) of its vertical dimensions. At the 

lower point, a minimum distance of four (4) inches (102 mm) shall 

be maintained above the controls with the strapping.
5. An water heater supported from the ground shall rest on level 

concrete or other approved base extending not less than three (3) 

inches (76 mm) above the adjoining ground level.
6. When an water heater is located in an attic, attic-ceiling 

assembly, floor-ceiling assembly, or floor-subfloor assembly where 

damage may result from a leaking water heater, a watertight pan 

of corrosion resistant materials shall be installed beneath the 

water heater with a minimum three-quarter (3/4) inch (20 mm) 

diameter drain to an approved location.

Summary of Contents for ARI POU-06




















Reviews: