Page 6
INSTALLATION INSTRUCTIONS
Installation
After removing all of the Powerphone equipment from the packaging,
identify the items supplied by referring to the diagram below.
Positioning the Powerphone
The Connection Box should be l ocated close to an analogue telephone line
outlet socket, and a 240 Volt mains power outlet with switch. Do not connect
to a non analogue telephone system.
If you wish to mount the Connection Box on a wall, there are two screw
inserts provided. Leave approximately 0.5cm between the wall and the
screw head.
For maximum acoustic performance, position the Powerphone at least 15cm
to 20cm from the edge of the table or other surface where the unit is being
used. Ensure the unit is also at least 50cm from wall surfaces.
Extension
Microphone
Recording
Device
Telephone
Line Wall
Connection
Single Line
Telephone
CSP500 Conference
Telephone
Connection
Box
AC Adapter
& Power outlet
8 Wire
Connecting
Cable
