Aristel IP 300 Series User Manual Download Page 24 | Manualshive

Page: 24 / 65

background image

Aristel IP 300 Series Customizing Your Phone

To update the new Ring Tone via Web interface:
1)

Click Browse button to choose the specific ring tone file.

2)

Click Upload button to upload the file, and then Confirm button to save the change.

Note:

The ring tone file format must be in 16bits WAV format (via Ulaw Compression), 8K
sample rate (monophony). Blank or other special characters can not be included in the
file name.

Codec Selection

The IP phone supports the following voice codecs:
G723_63, G722, G726-16, G726-24, G726-32, G726-40, PCMA, G729, PCMU and
G723_53.
You can enable/disable the desired codecs via Web interface. Please contact your
System Administrator for more details about the codecs.

To enable/disable the codecs:
1)

Choose Account->Codecs.

2)

Use the navigation keys to highlight the desired one in the Enabled/Disable Codecs
list, and press the

/

to move to the other list.

3)

Click Confirm to save the change.

Note:

Codec selection can only be set via Web interface.

- 19 -

«
...
22
23
24
25
26
...
»

Summary of Contents for IP 300 Series


































































Reviews:

No comments

Related manuals for IP 300 Series

Brand: Samsung Pages: 38

Brand: M2M Pages: 88

Brand: Unihertz Pages: 97

9520 - Charging Pod For

Brand: Blackberry Pages: 2

Sprint Treo 800w

Brand: Treo Fitness Pages: 4

Brand: Docomo Pages: 162

Brand: Samsung Pages: 137

Brand: Samsung Pages: 137

Brand: Samsung Pages: 139

Brand: Samsung Pages: 149

Brand: Samsung Pages: 152

Brand: Samsung Pages: 125

Brand: Panasonic Pages: 14

Brand: Docomo Pages: 4

Brand: Billow Pages: 102

ZENFONE 3 SERIES

Brand: Asus Pages: 35

Brand: Asus Pages: 81

Brand: Asus Pages: 80

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands