ARISTEL NETWORKS
PTY. LTD
Operating manual Ver. 1.1
Issued September 2006
page 8
Appointed Number
One way (PSTN to GSM)
Press 991# to select one way direction only
Bi-directional (PSTN to GSM and GSM to PSTN)
Press 992# to select bi-directional working
Appointed PTG (PSTN to GSM) number
Press 2 x…x# where x…x can be 29 digits maximum
Appointed GTP (GSM to PSTN) number
Press 3 x…x# where x…x can be 29 digits maximum
Delay
between
digits
Press 993# to enable the delay between digits (250mSeconds)
Press 994# to disable the delay between digits (250mSeconds)
Forwarding delay time
Press 4xx# to enter the delay time where xx is from 01 to 99 in 0.5
second increments
Number of rings before answer
Press 5xx# to enter the number of rings before the CTM3000 answers
an incoming call, where xx can be from 01 to 99.
Busy Tone learning
Press 985# to set the busy tone frequency to default (480Hz and 620Hz)
Press 990# to enter “Busy Tone Learning” mode. Hang up the telephone after
approximately 30 seconds when you hear an acknowledgement tone. The CO
yellow LED will flash 3 times if the learning was successful. The CTM3000
can now recognise the carrier busy tone signal
Other features/options
Press 981# to enable the CTM3000 to forward calls
Press 982# to disable the call forward feature
Press 999# to reset the CTM to factory default values
Aristel Networks Pty. Ltd
Unit 1 / 25 Howleys Rd.
Notting Hill
Victoria
3168
Tel: 03
8542
2300
Fax:
03 9544 3299
Web: www.aristel.com.au
Email:
