manualshive.com logo in svg

Arista NetVisor UNUM High Capacity Appliance, User Manual, Page: 77 / 81

Share
Download
Arista NetVisor UNUM High Capacity Appliance User Manual Download Page 77

77

NetVisor UNUM High Capacity User Guide: 2022.6.3.2

Appendix B (cont'd)

Configure UNUM IP (cont'd)

UNUM - Configure Host IP

Note: 

Please review the following usage information regarding the Ethernet adapters used by UNUM:

Eth0:

used for management, GUI (user interaction) and data collection via Netvisor REST. This

interface uses DHCP by default.

Eth1: 

used for internal system communication as clustered UNUM VM instances 

REQUIRE

 a

range of IP address settings for 

Eth1

 before normal operations begin.

Eth1

 is set to IP address 

172.16.250.150/24 

by default. 

WARNING!

 If you change the IP addresses of 

Eth1

 in a cluster configuration, you

disrupt normal operations. Please contact 

Technical Support 

if you need or want to

change the 

Eth1

 address in a cluster configuration.

Eth2:

<Optional> used to connect a Seed Switch or Fabric via an inband connection.

UNUM Ethernet Adapters Usage Table

Summary of Contents for NetVisor UNUM High Capacity Appliance


















































































Reviews:

No comments