17
NetVisor UNUM High Capacity User Guide: 2022.6.3.2
Network Connections
High Capacity Appliance Network Interface
After installation of the Arista NetVisor UNUM High Capacity Appliance, network activity must be setup as
follows (please refer to the figure below for proper connections):
1. For proper operation the Arista NetVisor UNUM High Capacity Appliance requires a separate 1G or 10G
switch for connectivity between eth1 on all Server nodes.
2. Connect your Management Network to Eth0 (1G or 10G) on Server node A. By default, Server node A
(Host) is configured for DHCP. To set a static IP, see
Appendix A
.
3. It is required to connect Eth1 into an isolated 1G or 10G switch. Server nodes will communicate via Eth1,
with the following IP Addresses:
a.
172.16.250.150 - 172.16.250.162
4. Plug in redundant power connections with the provided cables ONLY and power up.