Mounting the Switch
1
Rack
2
Switch
Note: Ensure that there is about 1U rack spacing between the two devices on the rack.
1. Align the rack mounting brackets with the chassis holes at the front of the switch.
2. Secure the mounting brackets using the screws provided in the rack mounting kit.
4.6.2
Inserting the Switch into the Rack
This section describes the steps to attach the switch into the rack.
Figure 11: Inserting the Switch into the Rack
1
Thread screw M4x6mm
Note: For more information regarding the screw size, refer to
unique_27_Connect_42_section_b1r_xt1_yqb
1. Place the switch into the rack by aligning the holes of the mounting bracket with the appropriate
holes on the chassis.
2. Secure the switch into the rack using the thread screws provided in the rack mount kit.
3. Insert the power adapter in the adapter bracket located next to the switch.
1
Cable ring
2
Cable ties
3
Power adapter cable
19
