3
Tools and Parts
Parts supplied
Removing the packaging
I
CAUTION!
Remove carton carefully, wear gloves to protect against sharp
edges.
I
WARNING!
Remove the protective film covering the product before putting
into operation.
Supplied Part
Pieces
Supplied Part
Pieces
Hood assembly and
LED lamps already installed
1
Duct covers
2
5x45 mm
6
6” round air transition
1
5.4x75 mm
4
8x40 mm
2
3.5x9.5 mm
2
10x60 mm
4
4x8 mm
4
Duct cover bracket
1
Torx 10 adapter
1
Mounting template
1
Parts not supplied
Tools/Materials required
• Level
• Drill
• 11⁄
4
” (3.2 cm), 1⁄
8
” (3.2 mm), and 1⁄
16
” (4.8 mm) drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Jigsaw or keyhole saw
• Metal snips
• Screwdrivers:
- Flat-blade
- Phillips
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
For vented installations, you will also need:
• 1 wall or roof cap
• Metal vent system
