EN
10
PRE-MOTOR FILTER CLEANING/REPLACEMENT
The pre-motor
fi
lter needs to be cleaned regularly and replaced every 6- 9 months, according to use.
• Remove the bag support (FIG. 8).
• Remove the
fi
lter (FIG.9) and shake it vigorously to clean it. If it is very dirty, wash it with lukewarm
soapy water; rinse it well and leave to dry naturally.
Important
DO NOT dry the
fi
lter using arti
fi
cial means. To replace the
fi
lter, contact your Assistance Centre.
• Re
fi
t the
fi
lter in its housing, making sure that the rough surface of the
fi
lter is visible.
• Then re
fi
t the dust bag and make sure that the
fi
lter compartment is in place before use.
EXHAUST FILTER CLEANING/REPLACEMENT
The outlet
fi
lter needs to be cleaned regularly and replaced every 6- 9 months, according to use.
• Remove the cover of the exhaust
fi
lter, using the lever (FIG. 10).
• Lift out the
fi
lter and shake it vigorously to clean it. If the
fi
lter is very dirty, wash it with lukewarm soapy
water; rinse it well and leave to dry naturally.
Important
DO NOT dry the
fi
lter using arti
fi
cial means. To replace the
fi
lter, contact your Assistance Centre
• Re
fi
t the
fi
lter in its housing, making sure that the rough surface of the
fi
lter is visible and that the
fi
lter
holder is in place correctly before using.
TROUBLESHOOTING
THERMAL CUT OUT
The vacuum cleaner is equipped with a thermal cut-out device to protect it if the motor should overheat.
If the vacuum cleaner should suddenly stop on its own, proceed as follows:
• Switch off and unplug the vacuum cleaner.
• Look for the cause of the overheating (suction tube clogged, dirty
fi
lter, etc.).
• Clean the tube, empty the dust container and clean the
fi
lters if necessary.
• Wait about 30-40 minutes to give the motor time to cool down.
• After 30-40 minutes, plug the appliance into the mains power and switch it on. The vacuum cleaner
should work now.
• If it continues not to work, wait a further 20 minutes and then try again.
• If the appliance still does not work, contact your nearest Assistance Centre.
Summary of Contents for Eco Power 2732
Page 48: ...46 ...
