ARIETE 2479, Instructions For Use Manual

Page: 27 / 42

WHAT TO DO IF...
General (all functions)
• The appliance cannot be started
up
Dust vacuuming
(dry vacuuming)
• Dust is discharged when vacu--
uming
• Suction power slowly deterio--
rates
• Inadequate suction power
Washing cleaning
• The suction power decreases
suddenly
- Are the mains connection cable, plug and plugbox in or--
der?  Before checking disconnect the main power sup--
ply plug and only have any necessary repairs carried out
by an authorised specialist.
- Is the appliance switched on?

Check.
- Has the filter system been installed with enough water in
accordance with the operating instructions?
- Is sufficient water in the dirty water tank and is the intake
filter fully immersed in the water bath?

Check.
- Is the intake filter blocked directly by dirt or are the noz--
zles blocked in the intake connecter?

Dismantle and
clean or rinse out with water.
- The motor filter (19) is dirty or incorrectly fitted?  Check.
- The Magic Filter () is dirty or incorrectly fitted?  Check.
- The triple filter for exhaust air (15) is dirty or incorrectly
fitted?  Check.
- Is the filter blocked?  Clean the filter.
- Are nozzles, suction tube or suction hose blocked by
coarse dirt?

Flexing the tube during operation will re--
lease any dust and dirt blocking the tube and clear the
stoppage.
- Is the filter blocked?

Clean the filters.
- Are nozzles, suction tube or suction hose blocked by
coarse dirt?

Flexing the tube during operation will re--
lease any dust and dirt blocking the tube and remove the
stoppage.
- Is the housing cover properly locked?

Check.
- Is the electronic suction power controller set to MIN?

Set suction power to MAX (orange lamp lights up).
- Is the mechanical suction power controller on the hand
grip open?  Close the slider on the hand grip.
- Is the dirty water tank full (float has responded)?  Emp--
ty and clean the tank.
GB
- 5 -