USING THE ATTACHMENTS
RIGID SUCTION TUBES (L)
Especially useful for reaching high or hidden areas (below furniture units, sofas, beds, etc.). These
tubes can be fitted directly to the hand grip (A).
FLOOR BRUSH (E) AND PARQUET FLOOR ATTACHMENT (F)
Ideal for cleaning hard surfaces such as floors or walls. A joint allows the brush to rotate through
60° to clean in all areas that are difficult to reach. It can be fitted directly to the hand grip (A) or
tube (L) (Fig. 1).
The parquet floor attachment (F) fits to the brush (E) and is used for thorough parquet cleaning.
“Magic Brush” (M) LIQUID VACUUM BRUSH AND RUBBER SCRAPER (N)
Ideal for cleaning up liquids on hard surfaces such as floors as well as on rugs and carpets. It guar--
antees perfect suction of liquids to leave surfaces perfectly dry and it can be used for dry vacuum
cleaning with excellent results. Use it with the rubber scraper on hard surfaces and without the
scraper on rugs and carpets (Fig. 1).
To fit this attachment, push it in backwards or forwards so that the rubber scraper slides in easily.
When this attachment is used with the detergent dispenser, it is first necessary to fit the spray (B) to
clean rugs and carpets so as to apply cleaning agent evenly over the surface to be cleaned. It can
be fitted to the hand grip (A) or tube (L).
WARNING
: Before dispensing the cleaning agent onto rugs or carpets, it is first necessary to vacu--
um up any dirt. Use the right amount of cleaning agent; the surface must not be completely wet.
CAUTION
: If the brush sticks to the floor during operation, it is sufficient to open the valve on the
handgrip.
CREVICE NOZZLE (D)
Ideal for special cleaning operations (crevices between furniture units, seats and chairs or sofas)
where suction cleaning is difficult. It can be fitted to the hand grip (A) or tube (L) (Fig. 15).
FABRIC CLEANING NOZZLE (G) AND BRISTLED ATTACHMENT (H)
This is particularly suited for cleaning surfaces such as armchairs, rugs, and smaller-sized hard
surfaces, and also for fabrics and curtains. It can be fitted to the hand grip (A) or tube (L) (Fig. 16).
The bristled attachment (H) can be fitted to the nozzle (G) and it is recommended for cleaning small-
sized fabric surfaces.
KIT FOR CLEANING GLASS AND WINDOWS (I)
Ideal for large glass surfaces, large mirrors, and smooth surfaces in general. It can be fitted to the
hand grip (A) or tube (L). To use the glass washer correctly, proceed as follows:
- evenly dispense the cleaning agent over the surface to be cleaned so as to dissolve the dirt.
- press the rubber scraper over the surface to be cleaned, moving it in vertical strokes from top to
bottom, with the suction function on.
GB
- 1 -
Summary of Contents for 2479
Page 4: ... ...
Page 42: ... 40 ...
