EN
- 7 -
If the cord is damaged, it must be replaced by the Manufacturer, by an Author-
20.
ised Technical Assistance Centre or in any case, by a similarly qualified person,
in order to prevent any risks.
Unplug the appliance from the mains electricity after each use.
21.
Any modifications to this product that has not been expressly authorised by the
22.
manufacturer in writing can cause a lowering of the safety and the annulment of
the user guarantee.
In the event that you decide to dispose of the appliance, we advise you to make
23.
it inoperative by cutting off the power cord. We also recommend that any parts
that could be dangerous be rendered harmless, especially for children, who may
play with the appliance or its parts.
Packaging must never be left within the reach of children since it is potentially
24.
dangerous.
DO NOT THROW AWAY
THESE INSTRUCTIONS
DESCRIPTION OF THE APPLIANCE (Fig. 1)
ASSEMBLY OF THE VACUUM
- Insert the fixed wheels (S) into the special housing on the back of the appliance and secure them
by pressing them until you hear them click into place(FIG. 2).
- Insert the castor wheels (R) into the appropriate housings positioned on the front part of the vacu-
um and block them by pressing them in until a click is heard (FIG. 3).
USINg THE APPLIANCE
ATTENTION
: Before installing or removing accessories, always ensure that the electrical plug has
been disconnected from the socket of the electrical mains circuit.
ATTENTION
: Never use the vacuum without the filter or with a damaged filter. The sucked up dirt
would enter inside the vacuum and would damage the motor.
A Suction hose attachment
B On/off switch
C Container full indicator
D Carry handle
E Coperchio contenitore
F Blower hose attachment
G Lid lock/release lever
H Contenitore
I Hose grip
L Flexible hose
M Floor brush
N Hard floors/carpet selector
O Extension tube
P Crevice nozzle
Q Small suction device with brush
R Small swivel wheels
S Large fixed wheels
T Filter
