ARIETE 1779, Manual

Page: 13 / 56

EN
- 11 -
as required. For firmer fruit or vegetables (e.g., carrots), use the maximum speed.
- For a smoother result, switch the appliance off, unplug it, remove the lid (H) and, using a suitable
cooking spatula, bring food stuck on the sides of the blender towards the center (I).
- Repeat the above steps for processing other foods.
Note : Never place more than 500g of firm fruit or vegetables into the blender at any one time.
Note : To prevent liquid spills, never place more than 1000 ml of soups, purées or other liquids into
blender.
WARNING
The blades are sharp; handle them with care.
Remove the protections from the metal blade before use.
Never add foods over the maximum level marked on the bowl .
Make sure that the lid is firmly locked into place before starting the appliance.
Never operate the appliance for more than 10 minutes at a time. Wait at least 30 minutes
before operating it again.
Never remove foods from the sides of the bowl or the blender while the appliance is operating.
Always switch off the appliance and unplug it from the mains power.
To prevent accidents or damage to the appliance, always keep hands and cooking utensils
well away from moving blades or discs.
Do not use your fingers to remove food from the sides of the bowl while the appliance is
functioning. Always use a suitable cooking spatula.
Never add liquids to mix together chopped foods when using the bowl.
Never press foods into the opening in the lid using your hands. Always use the food presser.
Always fit the lid before starting the blender.
Before blending warm liquids, always remove the blender filler cap. Never place hot liquids
inside the blender.
CLEANING
WARNING
NEVER PLACE THE APPLIANCE BODY, PLUG OR POWER CORD IN WATER OR OTHER
LIQUIDS; ALWAYS WIPE CLEAN WITH A DAMP CLOTH.
WARNING
ALWAYS UNPLUG THE POWER CORD FROM THE ELECTRICITY MAINS BEFORE FITTING OR
REMOVING SINGLE ATTACHMENTS OR BEFORE CLEANING THE APPLIANCE.
WARNING
The blades are extremely sharp. Always handle them with care.
- Remove all of the attachments used, working in the opposite order to the way they were fitted.