PAGE 3 • 35800-2-INS-RA • 800.798.0813 • NEED ASSISTANCE?
•
ARIESAUTOMOTIVE.COM
Step 6
Install two button-head bolts, fender
washers and nylock nuts into the side of
the front mounting bracket.
Install the one button-head bolt, fender
washer and nylock nut into the side of
the rear mounting bracket.
Snug the hardware,
but do not fully tighten.
Step 7
Place the side bar onto the brackets
and secure using four M10 hex bolts,
flat washers and lock washers.
Adjust and level the side bar.
With the side bar in position, it is
recommended to tighten all brackets
to the vehicle first, followed by the side
bar connections.
Step 8
Repeat this process on
the passenger side of the vehicle.
Congratulations on the installation
of your new ARIES 3" round side bars.
With the side bars installed, periodic
inspections should be performed to ensure
all mounting hardware remains tight.
To protect your investment, see the
'Notes and Maintenance' section on
the first page of this instruction manual.
