ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE? • 800.798.0813 • 35800-2-INS-RA • PAGE 2
Step 1
Locate the driver and passenger-side
mounting brackets. The driver side
will be installed first.
Note:
Each bracket is specific
to a mounting location and is
stamped accordingly.
Step 3
Install the nut plate with
the nut facing upwards.
Driver-side
Passenger-side
Step 2
Locate and remove the thin foam
adhesive tape glued over the driver-side
mounting locations in the subframe.
Step 4
Place the driver-side front mounting
bracket onto the vehicle and secure
with an M10 hex bolt, lock washer
and flat washer.
Snug the hardware,
but do not fully tighten.
Repeat this process to install the
driver-side rear mounting bracket.