ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE?
•
877.287.8634
•
RA
•
PAGE 2
Step 1
Remove the front fascia by removing the eight
plastic push fasteners from the upper edge
of the lower front fascia. Using a socket,
remove the two 5mm screws securing the
lower edge of the plastic fascia.
Step 2
From behind the factory bumper
on the passenger side, disconnect
the fog light wiring harness.
Step 3
On the driver side, remove the four nuts
securing the factory bumper in place.
Repeat this step on the passenger side.
Step 4
Once all of the bolts have been removed,
carefully lift the factory bumper from the
frame and set it on a flat work surface.
