PAGE 3 • 2055130-INS-RA • 800.798.0813 • NEED ASSISTANCE?
•
ARIESAUTOMOTIVE.COM
Step 4A - AdvantEDGE
™
Side Bars
Carefully place the side bar
onto the mounting brackets.
Ensure the outer edge of the side bar
is lined up with the outer edge of
the mounting brackets.
Locate the round slots on
the base of the side bar.
Insert four M8 hex bolts into each slot,
sliding them towards the four mounting
bracket locations.
Step 4B - AdvantEDGE
™
Side Bars
Slide the bolts down the rail so that two
bolts are positioned for each bracket.
Carefully lift the side bar up and move
the bolts as necessary so they are in line
with the slots on the mounting brackets.
Secure the side bar to the brackets
using flat washers, lock washers
and M8 hex nuts.
Snug the hardware, but do not fully
tighten. Continue to step 6.
If installing RidgeStep
™
running boards, skip to Step 5A
Step 5A - RidgeStep
™
Running Boards
Slide the four C-shaped track
mounting brackets into the rail slots.
Step 5B - RidgeStep
™
Running Boards
Carefully place the running board
onto the mounting brackets.
Align the C-shaped track mounting
brackets with the mounting brackets
on the vehicle.
