ARIESAUTOMOTIVE.COM
•
NEED ASSISTANCE? • 800.798.0813 • 2055130-INS-RA • PAGE 2
Step 1
Starting on the driver side, locate
the four mounting tabs along
the bottom edge of the vehicle.
Step 2
Starting at the front driver-side mounting
location, locate the threaded hole on the
inside of the body panel.
Place a bracket onto the vehicle and
secure the with two M8 hex bolts,
lock washers and flat washers.
Snug the hardware,
but do not fully tighten.
Repeat this step to install the
bracket over the second and third
mounting tab locations.
Step 3
Locate the rear driver-side mounting tab.
Insert a bolt plate through the hole. Place
a bracket onto the vehicle and secure
with an M6 flat washer, lock washer
and hex nut.
Notes and Maintenance
Before you begin installation, read all instructions thoroughly.
Proper tools will improve the quality of installation and reduce the time required.
For chrome powder coat, polish may be used to clear small scratches
and scuffs on the finish. Mild soap may be used also to clean the product.
For black finishes, mild soap may be used to clean the product.
Refer to the table to the left when securing hardware during the
installation process to help prevent damage to the product or vehicle.
Torque Specifications
M
E
T
RIC
M6 bolt
3 ft.-lbs.
M8 bolt
7 ft.-lbs.
M10 bolt
16 ft.-lbs.
M12 bolt
28 ft.-lbs.
SA
E
1/4" bolt
3 ft.-lbs.
5/16" bolt
7 ft.-lbs.
3/8" bolt
16 ft.-lbs.
7/16" bolt
20 ft.-lbs.
1/2" bolt
28 ft.-lbs.