background image

GB - 27

To obtain a complete parts manual, find your 
model and serial number. Then go to 
www.ariens.com or call 1-920-756-4688.

SERVICE PARTS

Order the following parts through your 
Dealer:

Part No.

Description

00036800 Stens Mix Hi-Temp Grease 

(3, 3 oz. cartridges)

21533400 Spark Plug (932038, 507)

21533500 Spark Plug (932037, 039, 505, 

508)

07219100 Impeller Belt (932038, 507)

07232500 Impeller Belt (932037, 039, 505, 

508)

07210600 Traction Belt (932038, 507)

07210700 Traction Belt (932037, 039, 505, 

508)

53200500 Shear Bolts

03248300 Friction Disc

ACCESSORIES

See your authorized Ariens dealer to add the 
additional accessories available to your 
Sno-Thro.

Part No.

Description

73203100 Slicer Bar*

72200600 120 Volt Starter Kit

73202500 240 Volt Starter Kit*

72406500 Front Weight Kit*

*Available in CE countries.

TROUBLESHOOTING

PROBLEM

PROBABLE CAUSE

CORRECTION 

Engine will not 
crank/start.

1. Fuel tank is empty.
2. Fuel shut-off valve closed.
3. Build up of dirt and residue 

around governor/
carburetor.

4. Key Switch not in run 

position.

5. Electric starter not 

functioning.

1. Fill fuel tank.
2. Open fuel shut-off valve.
3. Clean area around governor/

carburetor.

4. Put Key Switch into run position.

5. Check for a bad starter or 

connections.

Engine stops.

1. Out of fuel.
2. Fuel shut-off valve closed.

3. Mechanical jam in blower 

rake or impeller.

4. Polluted fuel supply.

5. Faulty spark plug.

1. Fill fuel tank.
2. Open fuel shut-off valve.

3. Turn off engine, remove key, and 

wait for all moving parts to stop. 
Check for and remove 
obstruction and repair before 
restart.

4. Replace with clean fuel.

5. Replace or clean spark plug.

Engine 
problems.

1. See Engine Manual.

Summary of Contents for SNO-THRO 932037 - 724
































Reviews: