background image

GB - 4

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Controls and Features  . . . . . . . . . . . . . . . 12

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Maintenance. . . . . . . . . . . . . . . . . . . . . . . . 17

Service and Adjustments . . . . . . . . . . . . . 19

Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Troubleshooting. . . . . . . . . . . . . . . . . . . . . 27

Service Parts  . . . . . . . . . . . . . . . . . . . . . . . 27

Accessories . . . . . . . . . . . . . . . . . . . . . . . . 27

Specifications  . . . . . . . . . . . . . . . . . . . . . . 29

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

THE MANUAL

Before operation of unit, carefully and 
completely read your manuals. If used 
improperly, this unit could be dangerous and 
cause personal injury or property damage. 
The contents will provide you with safety 
instructions for the safe use of your unit during 
normal operation and maintenance.

All reference to left, right, front, or rear are 
given from operator standing in operation 
position and facing the direction of forward 
travel.

MODEL AND SERIAL NUMBERS

When ordering replacement parts or making 
service inquiries, know the Model and Serial 
numbers of your unit and engine.
Numbers are located on the product 
registration form in the unit literature package. 
They are printed on a serial number label, 
located on the frame of your unit.

• Record Unit Model and Serial numbers 

here.

• Record Engine Model and Serial number 

here.

PRODUCT REGISTRATION

The Ariens dealer must register the product at 
the time of purchase. Registering the product 
will help the company process warranty claims 
or contact you with the latest service 
information. All claims meeting requirements 
during the limited warranty period will be 
honored, whether or not the product 
registration card is returned. Keep a proof of 
purchase if you do not register your unit.

Customer Note: If the dealer does not 
register your product, please fill out, sign, and 
return the product registration card to Ariens 
or go to www.ariens.com.

UNAUTHORIZED REPLACEMENT 
PARTS

Use only Ariens replacement parts. The 
replacement of any part on this vehicle with 
anything other than an Ariens authorized 
replacement part may adversely affect the 
performance, durability, or safety of this unit 
and may void the warranty. Ariens disclaims 
liability for any claims or damages, whether 
warranty, property damage, personal injury or 
death arising out of the use of unauthorized 
replacement parts. 

For a brief list of replacement parts see 
Service Parts in this manual. To obtain a 
complete parts manual, find your model and 
serial number. Then go to www.ariens.com or 
call 1-920-756-4688.

TABLE OF CONTENTS

INTRODUCTION

Serial Number 
Label

Figure 2

OS0522

© Copyright 200

4

 Ariens Company

Summary of Contents for SNO-THRO 932037 - 724
































Reviews: