Step One:
Unfold Handlebar
1.
Remove the lower and loosen the upper hardware on the
handlebar assembly.
2.
Loosen the hardware on the shift rod.
3.
Put the speed selector lever in the neutral position.
4.
Rotate the handlebar into operating position.
NOTE
: The handlebar has two height positions. Adjust the
handlebar height to provide better operator comfort. See
Handlebar Height
in Owner Manual.
5.
Install and tighten the hardware on the handlebar assembly
and shift rod.
6.
Check tension on auger and traction clutch cables.
IMPORTANT:
Cables should not be slack nor under tension. Adjust
as necessary.
