ARHAUS ADONES 70ADONES42RD, Assembly Manual

Page: 355 / 405

Please remove all contents from the package, inspect and review parts list.
CAUTION: To reduce personal injury and damage to your base or umbrella, read and
follow this instruction manual. We recommend a two-person team for assembly and
disassembly.
Save information for future reference.
2 1
1 Base Cover 1
2 Steel Base Frame 1
3 Add-On Weight Containers 4
4 Feet 4
5 Screws 4
6 Wrench 1
7 Playground Sand (not included) 400 lbs.
PART LIST
Part Description Qty.
CAUTION: Fully assembled, the umbrella weighs over 500 lbs. Moving the umbrella fully
assembled will increase the risk of damage to your umbrella and/or can cause serious injury. We
recommend a two-person team for assembly and disassembly.
6mm Hexagon
Wrench
8mm Hexagon Wrench
Rotating Hub
Main Frame
(Fig. 1)
(Fig. 3)
(Fig. 4)
(Fig. 5)
(Fig. 6)
Base Assembly
Select area to set base frame and place in desired location. NOTE: Moving the umbrella will
be difficult once fully assembled. Screw (4) feet onto bottom of base frame with supplied
(4) screws (Fig. 1). Remove rotating hub from the main frame (sold separately) by removing
the (2) bolts and (2) washers (Fig. 2), set aside bolts and washers for later use. Now, place
rotating hub onto base frame and secure with supplied (5) hub bolts and washers included
with umbrella (Fig. 3). Remove caps from each add-on weight container and fill with dry
playground sand (Fig. 4). The containers hold up to 400 lbs. of sand. Fill each add-on weight
with playground sand. Place each add-on weight container into base frame sections (Fig. 5).
Carefully place base cover onto base frame (Fig. 6).
LEVELING: If needed, adjust frame
corners using supplied wrench until frame is level (Fig. 7). Your base is now ready for
umbrella installation.
(Fig. 7)
(Fig. 2)
REQUIRED FOR ASSEMBLY:
• 400 lbs. playground sand (not included).
IMPORTANT: Prior to assembly it is important to decide on the location of the umbrella.
• Allow ample height to avoid damage to your umbrella during assembly and usage.
• Choose a location that is level and sturdy.
• Avoid any sloping or soft ground.
• Consider a location that will maximize the umbrella’s rotating swivel function. Placing
the umbrella between two entertaining areas is ideal.
NOTE: Some parts may be included in the styrofoam packaging.
DO NOT discard any packaging or box until assembly is complete.
355