ARHAUS ADONES 70ADONES42RD, Assembly Manual

Page: 257 / 405

PARTS INCLUDED
A 1
TABLE TOP
B 2 TABLE BASE
C 2 BRACE
D 8 LARGE BOLT (M8 X 25MM)
E 8 LARGE FLAT WASHER
F 8 LARGE LOCK WASHER
G 4 SMALL BOLT (M6 X 25MM)
H 4
SMALL FLAT WASHER
I 4
SMALL LOCK WASHER
J 1 UMBRELLA HOLE CAP
ASSEMBLY INSTRUCTIONS
CARE INSTRUCTIONS
1.Clear periodically by wiping the frame with a soft clean cloth slightly moistened with water.wipe dry
2.Do not use abrasive clean,chemical cleaners,or metal polishes.The metal frame has a protective
lacquer finish that could be damaged by chemical or abrasive cleaning agents.
IMPORTANT SAFETY INSTRUCTIONS
1.Do not place heavy objects on the table.
2.Never sit on,stand on or apply heavy pressure to the frame.
3.Do not allow children to play on or round the table.
2. Attach one end of brace (C) to table base by aligning the bolt hole on the brace with hole on table base and inserting
small bolt (G) through small lock washers (I) and small flat washers (H).Loosely secure with wrench.
3. Check the alignment of all parts, and adjust if necessary. Once the alignment is correct and all bolts are in place,
tighten all bolts with wrench. With the help of another person, carefully turn the table to the upright position.
1. Carefully unpack the contents in the carton.
2. Carefully turn the table top (A) upside down on a soft surface. Attach the two table bases (B) to the table top (A) by
aligning the bolt holes on the bases with those on the table top and inserting large bolts (D) through large lock washers
(F) and large flat washers (E). Loosely secure with wrench.
Do not tighten the bolts at this point.
ASSEMBLY INSTRUCTIONS
ARHAUS
MONTEGO RECT. DINING TABLE
257