manualshive.com logo in svg

Argus 152, Manual

Share
Download
Argus 152 Manual Download Page 24

5 Configuring accesses

24

ARGUS 152

5.1 Access wizard

Continued on 
next page

ARGUS switches to the "Accesses" main 
menu.

You can now configure the selected 
access, here VDSL, using the access 

wizard.

The query parameters of the access 

wizard depend on the selected access 
(ADSL, VDSL, ...), see page 27.

Selection of physical interface (here 
VDSL).
- For xDSL, see page 35.
- For Ethernet, see page 70.

- For BRI, see page 208.
- For POTS, see page 278.
- For Copper tests, see page 290.

ARGUS switches directly to the access 
mode settings.

Selection of  access mode (here VDSL 
VTU-R terminal) device).
- For xTU-R TE, see page 43.
- For xTU-R bridge, see page 66.
- For xTU-R router, see page 68.

Summary of Contents for 152

























































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands