User’s Manual
26
Entering Suspend Mode:
The following puts the PT-9X30/PA-100 in suspend mode:
Press
key while the unit is on.
The duration timer for
Switch state to Suspend
expires, which indicates that there
has been no use for a specified of time.
The battery pack discharges completely.
Tap
Start
→
Suspend
Figure 3-13 Suspend Mode
3.6.4
Resume
Press
key to suspend or resume (wake up)
Waking the PT-9X30/PA-100
The default wakeup conditions define what actions wakeup the PT-9X30/PA-100. These
setting are configurable and the factory default settings are subject to change / update.
Status
Description
Condition for Wakeup
Power Off
When the PT-9X30/PA-100 is set to suspend
mode by pressing
, this action wakes the PT-
9X30/PA-100.
Press
button
Auto Off
When the PT-9X30/PA-100 enters suspend mode
by automatic power-off, this action wakes the PT-
9X30/PA-100.
Press
button
3.7
Resetting the PT-9X30/PA-100
If the PT-9X30/PA-100 stops responding to the system, you may need to rest it. There are
three ways to reset - warm boot, cold boot and clean boot.
A warm boot and cold boot restart the PT-9X30/PA-100, but all data that have not saved will
get lost. All data in flash will be preserved.
A clean boot will erase all data except User application folder. In addition it returns formats,
preferences and other settings to the factory default setting.
Tap here to set the PT-9X30 into suspend
mode