Argosy HD353N, User Manual, Page: 40 / 48

Mounting SMB Server in Linux
Mounting SMB Server in Linux
The following operation is performed in Fedora command line environment. The IP address of
this device is set to 192.168.2.1 (its default value). Actual scenario of application may vary from case
to case.
1. Using the smbclient command to check the content of the NAS.
–
Input smbclient -L 192.168.2.1 -U admin after the prompt. The system will
prompt you with “ Password: ”. Input admin (the default password for user admin )
to get a list of directories within the NAS.
2. Create a folder as the mount point for the NAS.
–
Input mkdir /mnt/admin after the prompt for mounting of the shared directory
“admin”.
–
Input mkdir /mnt/usb1 after the prompt for mounting of the USB external drive.
3. Mount the NAS with mount command.
–
Fedora 5 and later: Input mount -t cifs -o username=admin //192.168.2.1/
38