Assembly Instructions
15
Step
27
Step
28
y
y
y
y
x
x
Fit the back
a:
Square up the unit by
making sure that
measurement
x to x
equals y to y.
b:
Place the back
onto the unit.
Nail around the
outside edges of the
back .
Note:
Nails should be
spaced about 150mm
apart.
Stand the unit up for
the next step.
17
E
The measurement from top corner X to bottom corner X must be
equal to the measurement from top corner Y to bottom corner Y
a:
17
Warning:
The
unit is heavy.
Lift with care.
x
x
b:
E
17
Fit the drawers
Starting with the bottom
drawer, slide both the
runners forward and
locate the drawer
sides and
between them, lining up
the holes in the drawer
wrap with the 2nd
'threaded' holes in the
runners .
Working from the inside
of the drawer, insert 2
screws through the
drawer sides and out into
the 2nd threaded hole in
the runner.
J
M
M
2nd threaded
hole
M
J
15
16
J
J
Note:
Do not overtighten
the screws .
If they catch on the
runner you may need to
loosen them slightly.
J
Remember:
The right
drawer front has a
small identification hole
(refer to Step 1).
