Finished
front edge
Finished
front edge
A
Finished
front edge
Finished
front edge
A
Finished
front edge
Assembly Instructions
11
Step
18
Prepare the 2 front
rails
Insert 2 large locking
nuts into each of the
2 front rails .
Tap 2 wooden dowels
into each of the 2 front
rails .
B
5
A
5
x 2
x 2
Fit the front rails to
the right side
Push the 2 front rails
onto the right side .
Use a screwdriver to
tighten the large locking
nut fitted to each of
the 2 front rails .
Note:
Turn the large
locking nuts as far as
they will go - more than
1/2 a turn.
2
5
B
B
5
Step
19
Step
20
B
A
B
A
5
5
5
Prepare the 2 back
rails
Insert 2 large locking
nuts into each of the
2 back rails .
Tap 2 wooden dowels
into each of the 2 back
rails .
B
6
A
6
B
B
A
B
1
6
Step 1 – Metal dowel A
Step 5 – Drawer base 11
Step 16+17 – Use 3rd hole(again if discussed with Alex then 2nd- Alex can you send confirmation if this is always going to happen please)
Step 19 – Locking nut B
Step 19,20,--23 – During these stages lay the unit flat.
Step 20 – X2 Back rails
Step 21 – Back rail no6
Step 23 – Top no4
5
5
A
B
2
