Argos Malibu 305/1788 Assembly Instructions Manual Download Page 26

Page: 26 / 48

Safety and Care Advice

Important -

Please read these instructions fully before starting assembly

•

Warning:

This unit weighs

approximately 91kgs.

Please lift with care.

• Check you have all the

components and tools listed on

pages 1, 2 and 3.

• Remove all fittings from the

plastic bags and separate them

into their groups.

• Keep children and animals

away from the work area, small

parts could choke if swallowed.

• Parts of the assembly will be

easier with 2 people.

• Make sure you have enough

space to layout the parts before

starting.

• Do not stand or put weight on

the product, this could cause

damage.

• Assemble the item as close to

its final position (in the same

room) as possible.

• Assemble on a soft level

surface to avoid damaging the

unit or your floor (use opened

out unit carton).

Care and maintenance

• Only clean using a damp cloth

and mild detergent, do no use

bleach or abrasive cleaners.

• From time to time check that

there are no loose screws on

this unit.

• This product should not be

discarded with household

waste. Take to your local

authority waste disposal centre.

• We do not

recommend the

use of power

drill/drivers

for

inserting screws

as this could damage the unit.

Only use hand screwdrivers.

•

Safety note:

It is

recommended that this unit is

secured to a wall using the

bracket supplied.

• Dispose of all packaging

carefully and responsibly.

Components -

Panels

Please check you have all the panels listed below

If you have damaged or missing components, call the

Customer Helpline: 08456 400800

quoting the reference

numbers below

Top

(D2035A)

(1423 x 494mm)

Base

(D2040A)

(1423 x 494mm)

Drawer Front

(D2044A)

(707 x 157mm)

x 3

Drawer Wrap

(W162)

(1308 x 95mm)

x 3

Drawer Base

(T162)

(299 x 695mm)

x 3

Summary of Contents for Malibu 305/1788

















































Search results

Summary of Contents for Malibu 305/1788

Reviews:

Related manuals for Malibu 305/1788

Brands by name

Popular brands

Argos Malibu 305/1788, Assembly Instructions Manual

Search results

Summary of Contents for Malibu 305/1788

Reviews:

Related manuals for Malibu 305/1788

Brands by name

Popular brands