Assembly Instructions
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
Rebated Edge
F73
COVERED EDGE
Use 2nd hole in from front of
Runner F1004 to fit 1st F73 then
fit other F73 to match other hole.
F1004
When you insert F900,
make sure the arrow is
pointing towards the hole
in the edge of the panel.
F900
F73
F1004
COVERED EDGE
13
y
x
e:
Step
19
H
D
H
Fit door and handle
Note:
The easiest way to
attach the door is to
fit the top hinge first,
then align and fit the
bottom hinge.
a:
Push the hinge
onto the front part of the
hinge plate .
The recess at the bottom
of screw B goes into the
slot in the hinge plate.
b:
Keep the hinge
FLAT against the hinge
plate as you slide it
across as far as it will go.
Tighten screw A.
c:
The hinge must be
flat against the hinge
plate prior to any
adjustment.
d:
The hinge must
NOT be AT AN ANGLE
to the hinge plate
when assembled.
This would indicate that
the recess at the bottom
of screw B had not
located in the slot in the
hinge plate and the hinge
would not be secure.
Remove the hinge from
the hinge plate and then
re-assemble being
careful to follow
instructions a-c.
e:
Attach a handle to
the door using 2
screws .
L
L
L
I
I
I
L
I
D
H
12
12
a:
b:
c:
d:
I
L
I
I
B
I
L
L
L
A
L
I
B
12
